XY-2B Portable Hydraulic Core Drilling Rig / Drilling Machine 500m Depth For Mine Equipment
XY-2B Core Drilling Rig brief introduction
XY-2B Drilling rig is mainly used for geological general investigation and exploration, road and tall buliding foundation exploration,kinds of hole in concrete structure, river levees, subgrade grouting hole ,drilling and driect grouting, civil wells and earth temperature central air-conditioner,etc
XY-2B Core Drilling Rig Product parameters
| XY-2 BType |
| Drill | Swivel Head |
Drilling depth
| Max.100~530m | Spindle speed
| 57 99 157 217 270 470 742 1024 r/min |
Hole diameter
| Max.600m | Spindle stroke | 560mm |
| Drill rod diameter | 42mm | Spindle pull-down | Max.50KN |
| Angle range | 0°~90° | Spindle lifting capacity | Max. 60KN |
| Oil pump | Water pump |
| Model | YBC-20/125 | Model | Gear oil pump |
| Rated pressure | 8Mpa | Working pressure | Max. 10Mpa |
| Flow speed | 20ml/r | | |
| Rated speed | 150r/min | | |
| Hoist | Power(diesel) |
| Max. lifting capacity | 212kgs | Model(diesel engine | 395K2 |
| Hoisting drum revolution | 20.39.85.170r/m | Rated power | 19.85KW |
| Drum diameter | 140mm | Rated speed | 2200 r/min |
| WEIGHT | AROUND 1200kgs |
| SIZE | 2220x900x1880mm |
XY-2B Core Drilling Rig Advantages
1. Propulsion, rotary and impact all powered by compressed air, the structure is simple, a single,
2.Have single, double top, bearing type selection of three kinds of supporting structure, can adapt to any geological
3.Operator focus, convenient and quick operation.
4.Unique dual mufflers, good silencing effect, reduce the pollution of the environment.
5.Drilling rig is suitable for harsh work environment and place that traffic is not convenient.
What should be paid attention to during the operation of the drilling rig?
a. When engaging the clutch or rotating the working wheel, it must be light, uniform and stable;
b. When changing the speed, engaging the horizontal and vertical axle boxes and changing each transfer handle, the clutch must be placed at the separation position or the work wheel must be stopped;
c. When using the lift, it is forbidden to press down the left and right handlebars at the same time;
d. After the gear oil pump is started, pay attention to the response of the oil pressure gauge and the hole bottom pressure indicator. During the drilling process, when the pressure at the hole bottom needs to be increased or decreased, it shall be adjusted gradually, and sudden increase or decrease is not allowed; When using the oil pressure system to quickly lift the vertical shaft (fast reversing rod), it is only allowed to carry out under the original load to prevent damage to the parts;
Product Tags:
|
|
Hydraulic 500m Depth Core Drill Rig For Mine Equipment Images
|
