Geotechnical Drilling Supplies/Soil Sample And Rock Sample Drilling And SPT Test Machine
Introduction to Crawler Mounted Drill Rig
Geological Core Sample Drilling Rig / Small Bore Well Drilling Rig is a new type of vertical spindle machine manufactured by Glorytek Industry which a diesel engine or motor may be chosen as power. It is primarily used with diamond drill bit or carbide drill bit for the
drilling in solid mineral deposit as well as those in engineering geotectonic survey, foundation pile hole and water well hole.
1.The Crawler Mounted Drill Rig Information:
| Drilling Depth: | 100m,70m,50m,30m |
| The Hole Diameter | 75mm,91mm,110mm |
| Kelly | 52*59*4200mm |
| Drill Pipe Diameter | 42mm |
| Drilling Angle | 90°-75° |
| Rig Dimensions(Length*Width*Height) | 1640mm*1030mm*1440mm |
| Weight (excluding power) | 500kg |
| Swivel Head |
| Spindle speed(3-speed) | 142/285/570 r/min |
| Spindle stroke | 450 |
| upward displacement speed of idling vertical spindle | 0.05m/s |
| Downward displacement speed of idling vertical spindle | 0.067m/s |
| Spindle pull-down max | 15KN |
| Spindle lifting capacity max | 25KN |
| Gyrator |
| The Vertical Speed (fore steps) | 71,142,310,620 r/min |
| The Vertical Stroke | 450mm |
| The Maximum Speed Of Vertical Load | 0.05m/s |
| The Vertical Load Down The Maximum Moving Speed | 0.067m/s |
| Max Feeding Force | 15KN |
| Max Lifting | 25KN |
| The Vertical Maximum Moving Speed | 1.25 KN.M |
| Hoist |
| Max.lifting capacity(1-speed,single rope) | 10KN |
| Cable volume (number) of hoisting drum | 27m |
| Wire rope dia. | 9.3mm |
| Mud Pump |
| Types | Horizontal reciprocating single-acting piston pump |
| Displacement max | 95 L/min |
| Equipped with motor | 77 L/min |
| Allowable working pressure max | 1. 2Mpa |
| Continuous working pressure | 0.7Mpa |
| Suction pipe dia | 32mm |
| Discharge pipe dia | 25mm |
The rig has the following characteristics
1. A reasonable range of rotation speed is selected. The rotation speed is divided into eight stages, with centralized speed change and mutual self-locking. It is suitable for drilling rig sampling and pile hole construction.
2. The rig has two reverse speeds, which is convenient to handle faults safely.
3. The rotary chuck adopts the manual ball chuck, which is reliable in clamping, does not damage the active drill pipe, and can reverse the rod without stopping.
4. Oil pressure feeding, easy operation, high drilling efficiency and low labor intensity.
5. The control handle is less, the layout is reasonable, and the operation is flexible and reliable.
6. The double disc normally closed friction clutch is adopted, which is flexible in opening and closing, and easy to adjust and use. Equipped with fore-and-aft moving oil cylinder, the rotator moves 465mm backward, which brings a lot of convenience to the following drilling tools.
7. The drilling rig is light in weight, compact in structure and convenient in assembly and disassembly. It is suitable for drilling in hilly or
mountainous areas.
1. Compact mechanical transmission structure, lightweight, vertical spindle for large through hole diameter with hexagonal drive
drilling rod, ensured torque transmission.
2. Higher rotating speed and rational , adaptable for the drillings with small diameter diamond drill bit or large diameter
carbide drill bit and other engineering hole drillings.
3. During the hydraulic controlled feeding process, both the pressure and speed of feeding can be regulated to meet the
requirements of different stratum drillings.
4. Less and centralized handles, easy operation.
Product Tags:
|
|
Soil Sample And Rock Sample Drilling SPT Test Machine Images
|
